

CUTOUT  1 -  4x4

This quality design collection is created by CHICO CREATIONS,   and is copyright protected.

We hope you enjoy your selection and invite you to visit us again 
soon for your embroidery needs.

Madeira Rayon Colors have been used.

SPECIAL INSTRUCTION:

Stabilizer used:
I used a dubble layer of Super Solvy, found it to be great due to using these designs on windowpane shirts and after rinsing the solvy desolved and the shirt did not scratch on the backside of the embroidery.

Cutout instruction:
With each design the machine will start stitching the oulines of the part of the design that have to be cut out.  Your machine will stop for a color change but do not change the color (I had to put in a additional color change for where the machine have to stop to do the cutout of the designs,  as all the machines software do not recognise the automatic stop) , then carefully remove the hoop from the machine, do not remove the fabric from the hoop.  Then carefully cut out the top layer of fabric and not the solvy of the inside part of that area as close to the stitching as you can (take care for not cutting the thread) .  I do not recomend using fabric that fray a lot, I found that polyester blends work well.  If you are not sure that the fabric will fray a lot, I recomend you using fray check all around the stitching, wait until dry before  you proceed cutting out that part, in any case I found by using fray check anyway I got a much neater cutout design.

Place the hoop back in the machine and proceeds as normal. 


----------
Cutout110.(free design)

2.46x3.69 inches; 6,681 stitches
4 thread changes; 3 colors

Color Changes
1. Light Pink or White
2. Light Green..................1105
3. Light Pink.....................1115
4. Light Purple..................1031


--------------------------------------------------------------------------------

Kind regards
Marie
http://www.chico-creations.com
http://www.secretsof.com/embroiderytips/chico